Skip to content
English
  • There are no suggestions because the search field is empty.

Inspectify Major System Plus Guide

Purpose of Inspection: To evaluate the functionality, safety, and condition of the property's major systems, as well as the interior of the home.

Estimated Time:  Approximately 2 - 4 hours, depending on the size, age, and condition of the property.

Note on Our Requirements

For all Inspectify Home Inspections and Major Systems Plus Inspections, the following is required:

  • The roof must be walked on or inspected using a drone.
  • The electrical panel cover must be removed, and the interior components must be photographed.
  • If present, all items listed in the template must be inspected

Please refer to our community guidelines for more information. If you are unable or unwilling to perform these tasks, please do not accept these jobs when offered. Instead, contact our Inspector Partnerships Team to configure the jobs Inspectify sends you.

Templates and workflows may differ between clients, but it is crucial to inspect all areas and systems listed in the report. 

Here are the most common items to inspect during your inspections:

  • Exterior
  • Interior  (Including, but not limited to, bedrooms, bathrooms, kitchens, and common areas.)
  • Roof
  • Plumbing
  • Electrical
  • HVAC
  • Appliances

Note: Some Major System Plus inspections include an inspection of the foundation.

Suggested equipment 

  • Drone (4k minimum)
  • Pole Camera
  • Ladder (15ft)
  • Screwdriver 
  • Thermal Imaging Camera
  • Water Temperature Gauge
  • Infrared Temperature Gun

General Notes:

  • Take Clear Photos: Many clients rely on these photos to make buying decisions.
  • Note Repairs/Damage: If any repair or damage is noted, identify it as a defect. When in doubt, add a defect. Defects are highlighted in the report summary to help clients.
  • Document Inspection Limitations: If you encounter any problems during the inspection, document them in the report as limitations.
    →For example, please add a limitation if you cannot access a system or an item is not present.
  • Duplicate Subsystems: When applicable, please add more rooms/systems to be sure you document the entire home. 
    →For example, bedrooms and bathrooms can be duplicated to add more rooms to the report.
    💡For further information on adding or deleting additional rooms, please see the following article: Deleting and Adding Conditional Rooms in the Inspectify App
  • Some clients may require video recordings of the home's interior and exterior. Please refer to the following article for expectations and best practices: Interior and Exterior Video Walkthroughs. 

Have any further questions? Reach out to our team, we’re happy to help!